16-Port GbE PoE+ Web-Managed Switch w/ 2 SFP Ports

16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports, IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, 220 W, Self-Healing Network, Endspan, 19" Rackmount - Retail Box
Save installation time and money with PoEThe Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (561341) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with sixteen Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1,000 Mbps.Power over Ethernet 802.3atThe Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions PoE/PoE+ Splitter.Sophisticated PoE Management Features including Self-Healing Network The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch provides detailed, real-time information about the connected PoE devices, how much power they draw and how much power is still available. The delay-time-per-port feature reduces the power hike that usually happens at system start, and the PoE priority feature (low, medium, high) allows you to define mission-critical ports that will continue to receive power even if the switch's power budget limit has been exceeded. Furthermore, you can define the maximum available power per port, turn PoE on and off per port and monitor the current power draw of all connected PoE devices. Finally, the Intellinet Network Solutions switch can send SNMP-traps messages to alert the administrator that the total power draw on the switch exceeds the user-defined threshold value. The Powered Device Monitor (Intellinet Network Solutions PDM) feature keeps an eye on connected PoE devices and restarts them in case they stop responding. What's more, you can also program the Intellinet Network Solutions PoE switch to restart connected PoE devices based upon a schedule, ensuring that the PoE devices remain stable and operational.Eliminate Bottlenecks with Gigabit SpeedsEquipped with 16 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 16-Port PoE Web-Managed Gigabit Switch (561341) offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances.Full Layer 2+ Management FeaturesThe switch includes full Layer 2+ Management features. The software set includes up to 4k 802.1Q VLAN and advanced protocol VLAN, and private VLAN. There are eight physical Quality of Service queues, Multicast filtering, Rapid Spanning Tree Protocol to avoid network loop, Multiple Spanning Tree Protocol (MSTP) to integrate VLAN and spanning tree, LACP, port mirroring and advanced network security features.Advanced SecurityThe Intellinet Network Solutions 16-Port PoE+ Web-Managed Gigabit Switch (561341) supports advanced security features. For secure switch management, HTTPS and SSH are provided. In addition, the login password and configuration packets are secured. Port binding allows a specific MAC address to be bound to a port, and then only that MAC has the privilege to access the network. Thanks to 802.1X port based access control, every user needs to be authorized first when they want to access the network. The Layer 2+ access control list (ACL) allows the user to define the access privilege based on IP or port number.* Total PoE budget for this switch is 220 watts. Per-port average power distribution is 13.75 watts; maximum per-port power usage cannot exceed 30 watts. Provides power and data connection for up to 16 PoE network devices Save installation cost by delivering data and power over existing network cables Self-Healing Network - the Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic Domotz compatible for cloud management (may require firmware upgrade) 10/100/1000 auto-sensing ports automatically detect optimal network speeds Two small form-factor pluggable GBIC module slots (SFP) IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports Power output up to 30 watts per port* PoE power budget of 220 watts 36 Gbps switch fabric Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras, etc.) Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection All RJ45 ports with Auto-MDIX and NWay auto-negotiation support Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification IEEE 802.3az (Energy Efficient Ethernet EEE) can be deactivated PoE management functions include PoE port settings, priority, power-on delay, scheduled PoE device restart and PoE device monitoring SNMP Management and Remote Monitoring (RMON) SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9 IPv4/v6 dual protocol Supports VLAN (tag-based and port-based) Provides IEEE 802.1x port-based security Supports link aggregation (trunking) Supports bandwidth control per port Supports port mirroring Supports two types of QoS: port-based and DSCP Broadcast storm control with multicast packet rate settings 512 kBytes buffer memory Supports 8k MAC address entries Supports jumbo frames up to 9 kBytes Supports Rapid Spanning Tree/Spanning Tree protocol Store and forward switching architecture Full/half duplex operation IEEE 802.3x flow control for full duplex Configuration via Web browser, Telnet or SSH Remote Reboot/restart LEDs for power, link/activity and PoE Two high-volume cooling fans ensure perfect ventilation Fully NDAA-compliant Three-Year Warranty

Industrial Gigabit PoE+ Web Managed Switch for IIoT, Smart Factory, Smart City

Planet GS-4210-16T2S 16-Port Layer 2 Managed Gigabit Ethernet Switch W/2 SFP Interfaces

16-Port L2 Managed Gigabit PoE+ Switch with 2 Uplink Gigabit Ports and 2 Gigabit SFP Slots GS2018PS2-Cudy: WiFi, 4G, and 5G Equipments and Solutions

94-1510PF, WELTRON 8 Port Gigabit POE+ Managed Switch w/ 2 SFP Ports

The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with two SFP ports is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables.

Intellinet 560559 Gigabit PoE Managed Switch (24 Port)

Save installation time and money with PoE., The Intellinet 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (560931) is designed to

Intellinet 16-Port PoE+ Web-Managed Gigabit Ethernet Switch with 2 SFP Ports

Unmanaged PoE Switch with 26 ports - 24 RJ45 and Two SFP, High-Power PoE+ The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1, 000 Mbps.

Intellinet 561907 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP

In addition, two small form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances. Furthermore, you can define the

INTELLINET 561341 16-Port Gigabit Ethernet PoE+ Web-Managed Switch W/2 SFP Ports

D-Link 52-Port Gigabit Smart Managed Switch 48 GbE + 4 Combo SFP Por – D-Link Systems, Inc

In addition, two small form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances. Furthermore, you can define the

INTELLINET 561341 16-Port Gigabit Ethernet PoE+ Web-Managed Switch W/2 SFP Ports

54-Port L2+ Fully Managed PoE+ Switch w/ 48 GbE Ports & 6 SFP+ Uplinks

Save Installation Time and Money with PoE The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 4 Gigabit Combo Base-T/SFP Ports is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables.

Intellinet 561426 24-Port Gigabit Ethernet PoE+ Web-Manage

Intellinet 16-Port GbE PoE+ Web-Managed Switch w/ 2 SFP Ports (561198)

The D-Link DGS-1010MP 10-Port Gigabit PoE Switch is an ideal solution for small offices and enterprise environments looking to expand the network with a set of Power over Ethernet devices such as wireless access points IP cameras and IP phones. Built with small business and enterprise users in mind the DGS-1010MP is a high-speed flexible switch that features a fanless quiet design so it can be conveniently placed anywhere in a working environment. Features. Power over Ethernet.

D-Link DGS-1010MP 10 Port Gigabit PoE Switch

Linksys 8-Port Business Desktop Gigabit PoE+ Switch (LGS108P)

Switch PoE: Guía Completa

Switch 24 PoE

UniFi - PoE Availability and Modes – Ubiquiti Help Center

PoE-Powered 5-Port Gigabit Switch with PoE Passthrough